Home · Products · Reflectiva Gold

Reflectiva Gold

Reflective thermal insulation membrane, with aluminium on both faces.

Technical content: Bogdan Ivănescu, graduate engineer, PhD candidate at the Technical University of Cluj-Napoca · updated on 16.10.2026

Where to buy Reflectiva Gold →

Benefits

It stops heat transfer by radiation and acts as a vapour barrier. It is installed from the interior, beneath the rafters, over the insulation between them, with the joints sealed with Power Tape.

Reflectiva Gold, an Isoflect product
Where it is used

Applications for Reflectiva Gold

Select the part of the house you wish to insulate.

3D rendering: the reflective package, two layers3D rendering: the four-layer reflective package3D rendering: the reflective package for habitable attics3D rendering: renovation of the attic floor slab3D rendering: internal wall insulation, without OSB
GARAN warranty label Reflectiva Gold
50 years

Commercial durability warranty, with GARAN certificate.

Calculate the material requirements for your house

Technical data

From the technical data sheet

95–97%Thermal radiation reflectivityReflectivity: the proportion of the radiant heat reaching the foil that is sent back. What it means →
0.05EmissivityprEN 15976Emissivity: an emissivity of 0.05 means that the aluminium face radiates only 5% of the heat that an ordinary surface would radiate, and therefore does not give off heat by radiation. The lower the value, the better. What it means →
190 mWater vapour diffusion resistance, SdEN 13859-1Sd (m): the degree to which the membrane resists the passage of water vapour, expressed as an equivalent air-layer thickness; high Sd = vapour barrier, low Sd = diffusion membrane, which allows vapour to escape. What it means →
10 mmTotal thicknessEN 823
12 m²Roll of 1.20 × 10 mEN 1848-2
VOC-freeVolatile organic compounds
The Isoflect sample pack: samples of the membranes and of Wolle
The sample pack

See and touch the products before ordering

The Isoflect sample pack contains samples of the reflective membranes and of Wolle wool insulation, so that you can compare the materials at home or on site.

Guides

Guides on this product

Where do you use the Gold. Silver or Multistrat membranes, and where those with variable SD?

When the Reflectiva Gold, Silver and Multistrat membranes are used and when a membrane with variable Sd is required, depending on the build-up.

Read the guide →

How to install the vapour barrier without errors

Learn how to install the vapour barrier in habitable attics, walls and floors: correct position, airtight overlaps and details that prevent condensation in every season.

Read the guide →

When to use a vapour barrier correctly in a house

Learn when to use a vapour barrier, where it is installed correctly and how to prevent condensation, mould and energy losses in walls and habitable attics, safely.

Read the guide →

Reflective foil: when it works and how it is installed

Learn when a reflective foil reduces heat gain, how it is installed correctly and why the air gap determines the thermal performance of the house in practice.

Read the guide →

Smart membrane versus vapour barrier

Smart membrane versus vapour barrier: the safe choice for controlling moisture and condensation in habitable attics, roofs and more efficient walls.

Read the guide →

Review of the REFLECTIVA membrane for habitable attics

The Reflectiva membrane: when it contributes to the control of vapour and condensation and to thermal comfort in habitable attics, unheated attics and walls.

Read the guide →

Share this page

Send it to someone who is insulating a house. You can also find us on WhatsApp and on social networks.